Manhole gasket Anker-2000-S  The integrated seal for long-lasting and problem-free application in manhole construction as per EN 1917  and DIN V 4034-1.   Benefits:  •	The Anchor-2000-S seal is fixed in the socket  and lines it completely.  •	The Anchor-2000-S forms a single constructional unit with the manhole element, thus preventing seals from being faulty or left out completely.   •	The Anchor-2000-S prevents lateral infiltration of water in case of overpressure.  •	The use of the Anchor-2000-S means safety in the manhole connection.  •	Trouble-free assembly of the components due to their own weight.  •	The Anchor-2000-S is characterized by a stable limitation of lateral stresss.  The Anchor-2000-S seals are subject to permanent  third-party monitoring by independent inspection organizations. They comply with the requirements  of EN 1917, EN 681-1, QR 4060 (FBS quality guideline) and other applicable quality standards.  Assembly:  The necessary lubricant Cordes GM-95 is applied  liberally by hand to the spigot of the concrete element, starting at the upper radius and going as far as  the connector shoulder.   Lubricant is also applied to the seal itself.   Material:  Anchor-2000-S seals are fabricated from styrene butadiene rubber (SBR). The use of SBR has proven  its worth in rainwater and waste water applications  due to its excellent sealing characteristics.   Note: We recommend using seals made of nitrile butadiene rubber (NBR) for applications involving  mineral fuels such as oils, petrol or similar.
Im Suedfeld 3 | 48308 Senden | Germany Tel.: +49 (0) 2536 9939 0 | Fax: +49 (0) 2536 9939 20
Anchor-2000-S                                
We can also produce special sizes on request. Call or or send us an e-mail with your requirements. We promise to promptly handle your request.
     Nominal diameter DN   800 1000 1200 1500
        H 18.5 18.5 22.5 25.5
Anker-2000-S  
TOBNORM System
MKP Anker-2000-S SD-97 SDN-V CSD-Plus-3 SDN-88 CLE Top-Seal-Plus-CX CSD-Plus-3 SDN-V SDN-88 SD-97 Top-Seal-Plus-CX MKP CLE H
        w 12.5 ± 2.0 12.5 ± 2.0 14.3 ± 2.2 17.2 ± 2.7
Contents such as technical specifications, values, and dimensions are given to the best of our knowledge, however, without any guarantee  and liability. If not specified otherwise, dimensions are given in millimetres. Our General Terms and Conditions shall apply.
Sealing systems for sewers
Manhole Manhole