It is no longer required to work under floating loads!  Material:   The manhole gaskets SDN-V are fabricated from styrene butadiene rubber (SBR).  The use of SBR has proven its worth in rainwater and waste water applications due to its excellent sealing characteristics.   Note: We recommend using seals made of nitrile butadiene rubber (NBR) for applications involving mineral fuels such as oils, petrol or similar.    Manhole gasket SDN-V  The prelubricated seal for long-lasting and trouble-free application in manhole construction according to EN 1917 and DIN V 4034-1.    Benefits:  •	Simple and trouble-free centering during assembly of manhole rings due to conical cross-section and self-gliding material.   •	The solid seal structure of the SDN-V  provides the manhole connection with a high lateral stability in the horizontal plane.  •	The fin-like structure of the SDN-V causes it to spread at the wall of the socket; this further increases the seal against the pressure from external water.   •	The effectiveness of the SDN-V is also enhanced by a large overlap on the seal surface.  The SDN-V seals are subject to constant third-party monitoring by independent testing institutions.  They comply with the requirements of EN 1917, EN 681-1,  QR 4060 (FBS quality guideline) and other applicable quality standards.   Assembly:  The seal is fitted directly before the shaft ring is installed.  It is prelubricated in the factory and thus immediately ready for assembly.
Im Suedfeld 3 | 48308 Senden | Germany Tel.: +49 (0) 2536 9939 0 | Fax: +49 (0) 2536 9939 20
H B SDN-V  compressed Plastomer load compension  segment CLE (optional)
SDN-V                                 
Mean socket gap size as per DIN V 4034 - 1
DN 800 -1000 800 -1000 1200 1500
     H* 18.7 20.2 24.0 27.5
       B 28.5 29.0 35.0 40.0
              w 10.5 ± 1.5 11.5 ± 1.5 13.5 ± 2.0 16.0 ± 2.5
We produce special sizes upon request. Please call us or send us an e-mail. We promise to promptly handle your request!
MKP Anker-2000-S SD-97 SDN-V CSD-Plus-3 SDN-88 CLE Top-Seal-Plus-CX CLE MKP Anker-2000-S Top-Seal-Plus-CX SD-97 SDN-88 CSD-Plus-3
* effective seal height
Contents such as technical specifications, values, and dimensions are given to the best of our knowledge, however, without any guarantee  and liability. If not specified otherwise, dimensions are given in millimetres. Our General Terms and Conditions shall apply.
Sealing systems for sewers
Manhole Manhole