SEWERS | MANHOLE
SEWERS | ACCESSORIES
SEWERS | CONNECTION SYSTEMS
CONNECTOR CAD
PR-20
Wedge-shaped
sliding seals CK
SEB
MANHOLE RIEBER
ANCHOR-3000
ANCHOR-2000
ANCHOR-DPA
Testable DOUBLE
wedge-SEAL CK-P-02
O-ring-gaskets
BK-62 + ZG-68
Wedge-shaped
sliding seals CK
Sealing systems
for jacking pipes
ANCHOR-2000-CX
CSD-PLUS-3
SDN-V
SDN-88
SD-97
ANCHOR-2000-S
TOP-SEAL-PLUS-CX
MKP-97
SD-15-VG
CLE
LUBRICANT
GM-95
PIPE GAUGE
RM-260030
ADDHESIVE
TECOPUR-8400
ADDHESIVE
TECO-BOND-3PLUS
CAD CONNECTING PIECE
ANCHOR-3000
The integrated seal with constructive
shear load limitation from Cordes
forms a structural unit with the pipe.
For normal and deep joints, the
Anchor-3000 offers particular
advantages in terms of durability and
long-term behavior of the pipe
connection.
ANCHOR-2000-CX
The integrated sealing system from
Cordes forms a structural unit with the
pipe. In addition to the standard
version, the coextruded version for
normal and deep joints offers special
advantages with regard to concrete
compaction, seal fit, pipe insertion and
material combination (hard / soft).
ANCHOR-2000
The integrated seal Anchor-2000 in its
standard version forms a single unit
with the pipe or manhole.
The Anchor-2000 seal is used
worldwide in nominal sizes
DN 150 - DN 3000.
ANCHOR-DPA
The economical integrated gasket
with reusable shuttering ring (BAC).
The Anchor-DPA seal is mounted
together with the reusable BAC
formwork ring on conventional bottom
sleeves. After curing of the concrete,
the formwork ring is removed and
reused. This is a particularly cost-
effective method of integrating
seals into concrete pipe sockets
in accordance with standards.
Testable DOUBLE
wedge-SEAL CK-P-02
TESTABLE DOUBLE
WEDGE-SEAL CKP-02
The testable and injectable double
wedge seal CK-P-02 for walkable pipes
and frames. By means of valve techno-
logy, the extremely safe double wedge
cross-section offers the possibility of
carrying out immediate leakage tests
without additional effort on the
construction site, as well as subsequent
sealing via injection if necessary.
Routine checks and repairs are still
possible years later.
O-ring-gaskets
BK-62 + ZG-68
O-ring-gaskets BK-62 + ZG-68
The 'chambered rolling ring' is an
appreciated variant for highest
requirements. The BK rolling ring is
used time and again as a mechanical
seal in the chamber in demanding
construction projects. However, the
rolling ring is also used worldwide as
a version with a wedge tip mounted
on the pipe tip.
Solid according to EN 681-1 (BK) or
closed-cell according to EN 681-3 (ZG).
Wedge-shaped
sliding seals CK
Wedge-shaped
sliding seals CK
Cordes wedge seals offer reliable
safety in an almost unlimited variety
of profiles. As a mechanical seal on
the spigot end for circular concrete
and reinforced concrete pipes, as well
as for egg and mouth profiles, frame
culverts with rectangular cross-
sections, but also for jacking pipes of
all types, mechanical seals of type "CK"
are the standard-compliant pipe
connection with the 'extra safety'.
Sealing systems
for jacking pipes
Sealing systems
for jacking pipes
The trenchless jacking of pipes enables
the precise underground relaying as
well as the replacement of sewer
structures in all diameters.
Cordes offers a variety of safe sealing
systems for jacking pipes, expansion
stations and also the jacking machines
/ TBMs themselves.
CSD-PLUS-3
The manhole sealing system with
the three plus points as inner values:
1. pre-lubricated system with open
sliding jacket and spreading effect
(see SDN-V), for frictionless drains
at the construction site
2. integrated, sand-filled,
non-springing load transfer with
tested statics according to DIN 4034-1
3. additional internal joint closure
with installation check
SDN-V
The pre-lubricated manhole seal with
particularly safe geometry.
The system of the open sliding jacket
prevents crimping and also the so-
called balloon effect when setting the
manhole rings. The unique spreading
effect of the fin-shaped sealing body
prevents leaks even with fluctuating
gap dimensions and additionally
increases safety against water pressing
from the outside.
SD-15-VG
The factory prelubricated seal for
long-term trouble-free application
in manholes in accordance with
EN 1917 and DIN 4034 - 1.
SDN-88
The fin-like structure of the SDN-88
creates a spreading effect towards
the socket wall, which additionally
increases the tightness against water
pressing from the outside.
Another advantage is the larger sealing
surface overlap of the SDN-88 also has
a positive effect.
SD-97
The mechanical seal for shaft elements
in classic functional geometry.
The SD-97 shaft seals offer safety and
conformity to standards as a cost-
effective alternative.
Top-Seal-Plus-CX
The integrated shaft seal including load
transfer for the Econorm shaft system.
The integrated sealing and load transfer
system forms a construction unit with
the Econorm shaft element and thus
largely eliminates application errors on
the construction site.
Due to the 'hard / soft' combination
of the coextruded profile, the properties
of the sand-filled load transfer area in
particular are optimized.
ANCHOR-2000-S
Built-in safety through integrated
sealing system for manhole structures.
The Anchor 2000-S manhole seal offers
all the advantages of a sealing system
integrated into the socket and can be
combined with conventional manhole
elements to DIN 4034-1.
Compatible also in the TOBNORM
system.
MKP-97
Additional safety for manhole
connections thanks to integrated socket
lining. Whether pre-lubricated or non-
lubricated, with or without load trans-
mission, the modular MKP system can
be combined with all manhole seals
on the spigot end, thus ensuring an
optimized sealing effect. The MKP
profile is simply fitted onto the conven-
tional bottom socket in accordance
with DIN 4034-1 and thus integrated
into the manhole ring.
CLE
The safe and standard-compliant
solution to the requirement for vertical
load transfer according to DIN 4034-1.
CONNECTOR CAD
By means of a corresponding core bore
and the respective Connector CAD seal,
almost all pipe materials and nominal
widths can be connected to the concrete
pipe or manhole without any problems,
for reinforced concrete pipes also in
different insertion depths. Also available
as a set with a special plastic connector
for connecting PVC and vitrified clay pipes.
CAD CONNECTING PIECE
The CAD connecting piece is the safe and
economical solution for the standard-
compliant connection of PVC, vitrified clay,
etc. branch lines.
PR-20
The connection seal with optimized
profile geometry.
The PR-20 offers optimized properties
in terms of pipe insertion and angular
deflection for a wide range of connection
variants.
MANHOLE RIEBER
The advanced integrated connection
system for connecting PVC pipes. As a
steel-reinforced elastomer molded part,
the Manhole Rieber seal is integrated
into the manhole construction.
Optimal for use in series production,
Manhole Rieber offers the best sealing
properties even at extreme angles.
Wedge-shaped
sliding seals CK
Wedge-shaped
sliding seals CK
Cordes CK gaskets are used in numerous
geometries and profile heights in many
connection situations.
Cordes CK connections are flexible,
versatile and economical.
SEB
Integrated system for the connection
of vitrified clay pipes.
The SEB ring is integrated into the
manhole base to form an optimum
connection for vitrified clay pipes
with socket K.
LUBRICANT GM-95
The Cordes lubricant GM-95 for pipe
and manhole assembly.
It was specially developed for concrete
pipes and manhole components.
ADDHESIVE-TECOPUR-8400
For the professional bonding
of mechanical seals to concrete.
PIPE GAUGES
RM-260030
For quick and easy measurement
of the inside and outside diameter
of pipes.
ADDHESIVE
TECO-BOND-3PLUS
ADDHESIVE
TECO-BOND-3PLUS
For the professional bonding
of mechanical seals on concrete.
For further Information (PDF) please move
the mouse over the respective button.
For further Information (PDF) please move
the mouse over the respective button.
For further Information (PDF) please move
the mouse over the respective button.
For further Information (PDF) please move
the mouse over the respective button.